Autel MaxiIM series released new VAG software update-reading immo data from VAG MQB48 series NEC35XX dashboard. The Autel APB130 which together with the XP400 Pro will allow you to add the key and read immo data for VW MQB NEC35XX, as well as several supported vehicles.
Here is a guide on how to connect APB130 Adapter with chip D703532, D70F3525, D70F3526, D70F3537, D70F3529 dashboard.
1. For chip D70F3525 dashboard
Step 1: Prepare the APB130 adapter.
Step 2: Connect the programmer to the 12 V DC power adapter.
Step 3: Carefully check the current component circuit board and find the corresponding circuit board in the following figure.
Step 4: Find position T1 in the figure and perform pin lifting (After the pin is lifted, the FVDD line needs to be connected to the lifted pin), or find position T2 in the figure where line cutting is needed and perform line cutting.
Step 5: Connect the programmer and the APB130 adapter as shown in the figure and read the data.
2. For chip D70F3526 dashboard
Step 1: Prepare the APB130 adapter.
Step 2: Connect the programmer to the 12 V DC power adapter.
Step 3: Carefully check the current component circuit board and find the corresponding circuit board in the following figure.
Step 4: Find position T1 in the figure and perform pin lifting (After the pin is lifted, the FVDD line needs to be connected to the lifted pin), or find position T2 in the figure where line cutting is needed and perform line cutting.
Step 5: Connect the programmer and the APB130 adapter as shown in the figure and read the data.
3. For chip D70F3529 dashboard
Step 1: Prepare the APB130 adapter.
Step 2: Connect the programmer to the 12 V DC power adapter.
Step 3: Carefully check the current component circuit board and find the corresponding circuit board in the following figure.
Step 4: Find position T1 in the figure and perform pin lifting (After the pin is lifted, the FVDD line needs to be connected to the lifted pin), or find position T2 in the figure where line cutting is needed and perform line cutting.
Step 5: Connect the programmer and the APB130 adapter as shown in the figure and read the data.
4. For chip D70F3532 dashboard
Step 1: Prepare the APB130 adapter.
Step 2: Connect the programmer to the 12 V DC power adapter.
Step 3: Carefully check the current component circuit board and find the corresponding circuit board in the following figure.
Step 4: Find position T3 in the figure and perform short- circuiting.
Step 5: Connect the programmer and the APB130 adapter as shown in the figure and read the data.
5. For chip D70F3537 dashboard
Step 1: Prepare the APB130 adapter.
Step 2: Connect the programmer to the 12 V DC power adapter.
Step 3: Carefully check the current component circuit board and find the corresponding circuit board in the following figure.
Step 4: Find position T2 in the figure where line cutting is needed and perform line cutting.
Step 5: Connect the programmer and the APB130 adapter as shown in the figure and read the data.
Autel APB130 Adapter Supported Vehicle:
For VW:
Arteon 2017-2021,Golf 2013-2021, Passat 2015-2021, Polo 2015-2021, Tiguan 2018-2021, Touran 2016-2022, Jetta 2018-2021, T-Roc 2018-2021
For Audi:
A1 2019-2021, A3 2021-2021, Q2 2017-2021, Q3 2019-2021
For Skoda:
Octavia 2013- 2021, Fabia 2015-2021, Superb 2015-2021, Kodiaq 2017-2021, Kamiq 2020-2021, Rapid 2013-2021
For Seat:
Arona 2018-2021, Ateca 2017-2021, Ibiza 2018-2021, Leon 2013-2021, Tarraco 2019-2021, Toledo 2013-2019
Learns more:
https://www.eobdtool.co.uk/wholesale/autel-apb130-adapter.html
Post a Comment