If you're working on a BMW G-Series X3 and need to add a key, the Autel IM608 II (or IM508S with XP400Pro) offers a reliable and professional solution. In this guide, we’ll walk you through the key programming process for a BMW equipped with a BDC2 (Body Domain Controller) system using the Autel IMMO Tablet.
Tools Needed:
- Autel IM608 PRO II or IM508S + XP400Pro (need License for BMW G-Series BDC2 Add Key)
- Autel KM100
- Autel IKEY
Step-by-Step Guide:
1. On the Autel IM608 II tablet, go to IMMO->BWW->Smart selection, than automatically identify BMW BDC2.
2. Read Key Information:
- Select Read Key Info to display current key slots, status, and key type.
- Confirm which key slots are used and which are available.
3. Go back to the main menu and Select 'Add Key':
Follow the on-screen instructions carefully.
Check out diagrams.
Follow the diagrams to connect XP400Pro to the BDC module or key reader as needed.
4. Read Immobilizer Data:
- The tool will extract IMMO data from the original key or ECU.
- Save the data securely in case it's needed later.
5. Read Original Key Info:
- Place the original key in the XP400Pro key slot to read full data.
- This step helps with cloning or backup if needed.
6. Use Autel IKEY to generate a remote.
7. Generate Dealer Key:
- Once the remote is prepared, select Generate Dealer Key.
- The tool will write the necessary data onto the new key.
- This step programs the transponder for starting the vehicle.
8. Test the new key: check remote lock/unlock and engine start.
Done!
That’s how to add key for BMW G-Series BDC2 by using Autel IMMO Scanner.
Conclusion:
Adding a new key for a BMW G-Series X3 with BDC2 is straightforward with the Autel IM608 II. This powerful diagnostic and key programming tool provides clear instructions, smart system detection, and built-in wiring diagrams to guide you through each step. Whether you're a professional locksmith or advanced DIYer, the IM608 II offers everything you need for modern BMW key programming.
إرسال تعليق